Revolution 2
OnBoard Receiver W/Steam Sound And Dual Amp NEW!
- SKU:
- REV 57202SS
- MPN:
- REV 57202SS
- Minimum Purchase:
- 1 unit
Description
- The 2.4 GHz radio system is bidirectional. That means that the transmitter not only sends commands to the locomotive but it also gets feedback data from the receiver in the locomotive.
- The IEEE 802.15.4 2.4GHz DSSS(Direct Sequence Spread Spectrum) radio transmission provides immunity from other radio sources that are in the same frequency range
- Power can come from on-board batteries or track power.
- The receiver can supply 5 amps of power while accommodating peak loads that can go to 8 amps.
- Six auxiliary outputs on the receiver can be used to operate sounds, smoke units or lighting.
- Built in diesel or steam sound.
- Requirement of input power: 9-26V pure DC.
- Non Input Power Polarity Sensitive.
- Overload protection.
- Overheating protection.
- Dual Audio Amplifier
- Audio Output Impedance: 4 or 8 Ohms
- On Board Plug and Play connectors
- Wirelessly sound and firmware upgradeable.